STARPHONIC Maple Concert Snare 14"x6"
TAMA's new Starphonic Concert snare drums feature 14"x6", 7ply, 6mm Maple shells for a warm, versatile tone. Employing a 120° snare bed allows for a freely resonating bottom head and maximum snare response. Both are also equipped with TAMA's Grooved straight hoops and Freedom lugs. With two different but very versatile snare assemblies, each offers plenty of tonal range to tailor the sound to the individual player's preferences and performance needs.
FINISHES
Learn MoreLACQUER FINISHES
EXOTIC FINISHES (LACQUER)
PREMIUM LACQUER FINISHES
DURACOVER WRAP FINISHES
UNICOLOR WRAP FINISHES
COCKTAIL-JAM KIT
COCKTAIL-JAM MINI KIT
COVERING FINISHES
OIL FINISH
※該当仕上げなし※
- LACQUER FINISHES
- LACQUER FINISHES
- GCR Gloss Cherry Red
- PBK Piano Black
LINEUP
SPECIFICATIONS
Learn More- Model Name
- CMP146
- Notes
- •Shell: 6mm, 7ply 100% Maple
•Size: 6"x14"
•Lug: Freedom Lug
•Hoop: Grooved Straight Hoop (10 hole)
•Strainer: MLS50AC Linear-Drive Strainer
•Butt: MLS50BC
•Snare Wire: Hybrid Snare Wire (MS12NN14L)
Nickel Wound Round Guitar String (6 strands in the center)
Black Nylon Coated Stainless Steel Wire (3 strands each outside)
FEATURES
Learn More-
Learn More
REMO® Renaissance Diplomat Head for Batter Side / REMO® Diplomat Hazy Snare Side Head
Close -
Learn More
The unique vent pattern allows for clearer, fuller, and more “open” tone, precise snare response, and unmatched sensitivity. This unique vent pattern also gives the performer auditory feedback similar to that of what the audience would hear.
Close -
Learn More
The shape of the edge is one of the most important factors which affect drum sound. Because the drumheads provide the important source of vibration, the shape of the contact point of the head and shell determines and defines the sound. This is why TAMA has worked so extensively on achieving the most functional shape for the drum head and edge.
Close
Picture shows a sectional view of the drum's bearing edge. As shown in Part A, the angle of the top edge is set 2.5mm inside from the outer surface of the shell. The edge is cut to a round collar so as to follow the natural shape of the drumhead (B). This design, which creates a better fit between the drumhead and bearing edge, maximizes the resonance of drum.This bearing edge shape is part of our TAMA tradition and is crucial in providing TAMA's unique drum sound. -
Learn More
Combines the tuning stability of a multi-flange hoop with the openness of a single-flange hoop. It also allows the player to have full access to the head’s playing surface.
Close -
Learn More
By looseing the tension rods, you can tilt the claw hooks backwards and away from the Grooved Hoop. This quick release system offers simple, speedy replacement of drum heads without having to take all of the tension rods out of the lugs.
Close -
Learn More
The Fine Adjuster on the snare throw allows for fine-tuning the center six Nickel wound guitar strings for customized tone and response.
Close -
Learn More
Six strands of Nickel guitar strings are flanked on each side by three strands of nylon coated, Stainless Steel wire. The wire seats within the throw off and butt plate, eliminating the need for snare chord and guessing the correct tension.
Close -
Learn More
STARPHONIC's strainer uses a "Linear-Drive" system, which we designed to provide greater control of the lever adjustment arm and more precise control of the strainer's deployment motion. Even if you move the arm rapidly, you will not hear the typical "slap" of the wires hitting the bottom head. The strainer movement is designed to work in a true "linear motion", similar to the motion found on "round sproket" drum pedals. Most strainers are not designed like this and tend to speed up right before the snare wires connect with the snare side head. Also, by tilting the angle of the butt plate 30 degrees, this design holds the snare wire cords or tape more firmly and reduces unnecessary pressure on the strainer and shell.
Close